Chemical Energy

Archive

Final Acceptance received from Wantai Steel

In September 2018 Inteco PTI received the FAC from Zhejiang Wantai Particular Steel Company Limited, located in Zhejiang outside Shanghai, China, for the start up and commissioning of a JetBOx™ Chemical Energy package, along with a Swingdoor.  Wantai Steel is has installed two (2) continuously fed Electric Arc Furnaces, which will be independent of each other.  Each furnace has three (3) JetBOxes™, three (3) supersonic oxygen injection burners, a four burner valve train, a PLC control cabinet, and an Operator Control Computer. 

The performance of the chemical energy system along with the Swing Door was outstanding and was able to achieve all of the process goals for this project.  Wantai awarded INTECO PTI will the Final Acceptance Certificate on September 12th, 2018.

 

Read more …

Southern Steel, Malaysia buys Inteco PTI Chemical Energy Package to upgrade their second EAF

Southern Steel in Malaysia has placed the order for a chemical energy package to upgrade their second furnace with JetBoxesTM and burners from Inteco PTI. This is a follow up order based on a successful installation of Inteco PTI chemical energy equipment on the furnace #1. The delivery of the equipment is planned in December this year directly followed with installation and start up.

Read more …

Ladle Dryer and Ladle Preheater for Gerdau Midlothian, USA

Gerdau Midlothian, located in Midlothian, Texas, USA, has purchased the second fully custom designed ladle dryer from INTECO PTI. The ladle dryer is designed to allow the ladle carrier to deliver a ladle directly under the preheater, where the ladle lid is vertically lowered onto the ladle for drying. 

The air/fuel burner control system is designed to follow the recommended drying profile by the refractory supplier. The user-friendly HMI based control system is provides clear information on the status of the preheat or dry-out cycle.

The aim of this investment was to deliver a fully dried ladle to the melt shop using the least amount of fuel. These demands could be fulfilled in the best way.

Read more …

Chinese Steel Mill, Jianyin Huarun, orders chemical energy equipment

Jianyin Huarun (former known as China Ressources), located in China, has ordered a complete revamp of their chemical energy system for their electric furnace. The INTECO PTI chemical energy system will include 4 JetBOxes™ with material injection ports, 4 supersonic burners, a gas train with PLC controls, and the operator HMI system. All equipment will be on site by end of November 2018 and start up will be before Christmas 2018.

Read more …

Phoenix Steel Swingdoor Project

Phoenix Steel located near Kunming, China has ordered INTECO PTI’s SwingDoor system for their 140 ton Consteel EAF.  In January of 2018 Phoenix Steel successfully commissioned four (4) jetboxes and burners along with a three (3) outlet carbon injection system from INTECO PTI.  The SwingDoor will help improve foamy slag control by keeping the slag door closed for almost the entire heat.  The slag door will only be opened for temperature / steel samples and de-slagging.   By keeping the slag door closed, less energy is lost, less carbon is consumed and more yield is conserved.  The equipment is scheduled to be delivered in late 2018 and start up is anticipated for early 2019.

Read more …